Wednesday, July 30, 2014

2015 Harley-Davidson Street 750

2015 Harley-Davidson Street 750 Review – First Ride

Even for those of us who came up on Japanese bikes, the new Harley-Davidson Street 750 – the Motor Company’s first new model since the V-Rod of 2001 – is perfectly acceptable. All six gears click in and out with nary a bang, and you don’t even need the light-pull clutch past about third. Steering’s quick and light, and ergonomics are really close to standard if you’re not tall.
Nobody expected a drag racer, so nobody should be disappointed, but the new liquid-cooled V-Twin runs great, with no stumbles or flat spots, right from idle – and it’s flexible enough to pull from 35 or 40 mph in top gear no problem.
One of our competitors managed to get a pre-production Street on a Dynojet 250 a few weeks ago, where it made 57.6 horsepower at almost 8000 rpm. That’s 11 hp more than an 883 Sportster on the same dyno. This more than makes up for the fact that the 883 makes more torque down low, and tells you all you need to know about how the new Street 750 compares to the old Sportster: One’s an old-fashioned, undersquare, cam-in-block two-valver with 9:1 compression; the other is a modern, 85 x 66mm, 4-valve-per-cylinder with single-overhead cams and 11:1 compression that likes to rev right into its (hard) limiter at 8000 rpm.

Splaying cylinders 60 degrees apart instead of 45 lets the tank snuggle down nice and tight on top of the 38mm Mikuni throttle body.
Mainly what strikes you when you see the Street in the flesh for the first time is how small it is. Harley has always gone overboard trying to keep seats low on its “entry-level” motorcycles (all

its bikes, really), but this time they decided to just shrink the whole bike. On its website, H-D says a new Iron 883 tips the scales at 562, ready to ride. For the Street 750, it claims 489. That’s a huge difference you can feel every time you pick the bike up off its kickstand, every time you accel- or decelerate, every time you go around a corner.
Discuss this at our HD Street Forum.
Wider-splayed (60-degree), shorter cylinders allow everything to be lowered and compacted. In short, the boys in Milwaukee have built a modern motorcycle. (They’ve also built one that will require its eight valves to be adjusted every 15,000 miles – no big deal really, since they’re screw-and-locknut swivel-foot adjusters, just like your old Porsche 911.)
 

The Street 500 starts at $6799; $7,499 for the 750. But a Mysterious Red Sunglo 750 is going to set you back $7,794.
And now for the bad news. To keep the 750′s price down to $7499, a few fit-and-finish corners were cut. The triple clamp castings look like they came out of the sand mold, got painted black and bolted onto the bike. The last time I saw anything like them was on the Cleveland Heist, made in China and no bones about it.
Where H-D sometimes goes to great lengths to hide cables and wires on some of its bikes, on the Street it seems to have left everything exposed on purpose. Maybe they’ll be selling a Dark

Custom Trim Kit, like they sell to cover the wheels and propane tank on your mobile home? Maybe that’s unfair?
It’s my job to find fault, but if you’re looking at what might be your first motorcycle, you won’t notice any of it, will you? Overall, the little Street cuts a low, lean, dashing figure. Its forward-leaning lines, especially the new gas tank, reminded me of the old Yamaha Radian, which was also a great little urban runabout.

 

 

I can’t say something nice about the bike’s triple clamps and wiring harness, so I won’t say anything. Wait! The fork lock is integrated into the ignition switch!
Urban is exactly how H-D’s mighty marketing arm is positioning this one, right down to its name and tagline: “The Street is where I live” almost implies it’s cheap enough for a homeless person to afford. At a bar on 6th Street in Austin, while I was there for the bike’s launch, a guy actually stole my half-drunk can of Lone Star. Now that is poor.



At 5’8” and about 160 pounds, the thing fits me pretty well. Tall people appeared to be a bit cramped, but I didn’t really hear any complaints after our shortish ride.
In town, the other Great Leap Forward is 3.5 inches of rear suspension travel – which is about 1.5 more than the Iron 883, and the Street actually absorbs most bumps instead of bludgeoning them with its back tire. The back tire itself is an unusual-sized, flat-profiled Michelin Scorcher with unusually tall sidewalls, which also seems to be really bump-compliant. It’s a 140/75 R15, which I thought maybe the design department had asked for. But Mark Daniels, lead designer on the Street, says the tire was specced by engineering. In any case, the Street goes wherever you point its skinny little 37mm fork tubes with enthusiasm, and likes to be treated disrespectfully like some kind of naked sportbike, even. It’s happy to be flung into corners and put away wet.
Suspension is not exactly sophisticated, but well-sprung for my 160 pounds, if a little underdamped when the going gets sporty and bumpy. There’s enough cornering clearance to have some fun but not enough to let you forget you’re riding a Harley. The brakes are old-school ABS, ie., the 292mm front disc doesn’t feel powerful enough to lock the wheel. Actual ABS is not available.







The dance of the seven veils is over. H-D’s first new model since 2001 seems worthy.
The seat is actually remarkably comfy, soft and nicely shaped, for about an hour. Later in the day, after you’ve been on it a few hours, it feels maybe a little too soft, but that’s such a personal thing. Your numbage may vary. (And H-D’s accessory catalog is already on the case with three seats – a Tallboy, a café solo and a reduced reach one, which scoots the rider even lower and 1.5 inches forward.)
Speaking of which, H-D claims 41 mpg; I saw 60 miles on 1.5 gallons, so that’s about right. The 3.5-gallon capacity might cause problems for Western-state riders. The other thing that might limit long-distance range is significant vibration that creeps into the handlebars at around 80 mph in spite of the engine’s counterbalancer.


Whichever marketing genius at H-D decided to throw in with the X Games deserves a medal. They’re pushing to make flat-track racing a new XG discipline, which really could breathe new life into the sport.
After it was all over, as I sat there killing time waiting for my ride to the airport and watching the rally car track get set up for the X Games at Circuit of the Americas, I really wanted to like the kids (some of them bearded) on the BMX bikes on the Jumbotron, but it’s hard. I think my generation needs the gasoline, preferably Ethyl.
My lunch beer had me almost dozing there in the shade when suddenly a couple of Stadium Super Trucks! making their X Games debut fired up in front of me and started testing out the track – hot-rod V-8s flexing serious muscle – and my eyelids sprang to attention. That’s Harley’s challenge maybe: Will a generation of deprived, clean-living youth, happy well into adulthood with self-propelled children’s vehicles, hop on the fossil-fuel bandwagon? Can they be converted?





H-D already has the designers at work showing what’s possible. Aftermarket support is a big advantage for any bike that says H-D on the tank.
I’m going to go with “yes.” Harley’s display at COTA for the X Games drew plenty of young attention, and my own 20-year old skatepark rat is dying to get his hands on a Street. He already has modifications in mind, which do not include a loud exhaust. He’s still traumatized from his time in the stroller when loud Hogs used to scare the hell out of him.






Monday, July 28, 2014

Ariel Ace (2015): new motorbike from makers of Atom




British sports car manufacturer Ariel - best known for manufacturing the big boy’s go-kart, the Atom - has pulled the covers off its first new motorcycle in more than 50 years.
The Ariel Ace bike will be priced from around £20,000, and will be manufactured in small numbers alongside the Atom sports car at the Ariel headquarters in Somerset.

What makes the Ariel Ace a special motorcycle?

The Ace will build upon Ariel’s relationship with Honda by featuring its 173bhp 1237cc V4 engine and drive system. Instead of focusing on the powertrain’s evidently enormous performance potential, Ariel reckons buyers will be attracted by its bespoke build system – claimed to be a first for a production motorcycle.
Each Ariel Ace will be made specifically to the individual rider’s requirements, and Ariel say there is a large number of customisable options, making each Ace 100% personal.

















How the Ariel Ace will be tailor made

Owners will be able to choose from variations such as front and rear suspensions, handlebars,
bodywork, size of fuel tank and even exhausts. The choice of wheels includes a lightweight carbonfibre and aluminium option made specifically for the Ace. Colours, materials and finishes on the bike will also be tailor made.
‘Motorcyclists have a real passion for their machines,’ said Simon Saunders, the owner of Ariel. ‘They like them to be individual, and they want them to be their bike. With the Ace the uniqueness is built in as the bike is produced and each one will be as individual as its owner.’
Building on a system used with the Atom, the Ariel Ace can be upgraded over time at the factory. This is a system that Ariel claims has seen much success with the Atom, with owners choosing to retain their vehicles and upgrade instead of possibly buying into the opposition.

Ariel motorbikes: a history lesson

Ariel’s roots can be traced back to 1870, when it used to make early Victorian bikes. The company prospered for almost a century, but folded in 1970. Biking enthusiast Simon Saunders started Ariel Motor Company in 1999 and began building the Atom, which has much in common with its two-wheeled ancestors.
Back in 1895, Ariel started a relationship with tyre manufacturer Dunlop and it’s been rekindled with the new Ariel Ace; customers can choose their pick of a number of Dunlop tyre options.
Production of the Ace is scheduled to start in early 2015 with only 100-150 to be produced each year.

Thursday, July 24, 2014

2014 Honda Valkyrie

2014 Honda Valkyrie 



As I write this, there are three hours left on American Honda Motor’s embargo on posting photos or writing about its new Valkyrie—and I’m amazed there’s nothing yet on the Internet. There’s been no speculation about a new Valk that I could find, so you’re probably as surprised as I was when I got these photos of the new model.
The first Valkyrie used a simple formula well-known to American hot-rod builders: take the frame and motor of a big, heavy car and chop away everything you don’t need. That first iteration was built right here in the USA from 1996-2003 and still has legions of fans. It used the flat-six, liquid-cooled 1520cc motor and five-speed gearbox from the old GL1500 Gold Wing (1988-2000), but with a different tube-steel chassis. It weighed in at 682 pounds dry—much lighter than its touring brother. Owner forums for the Valk are still active (hot topic: using a car tire on the rear wheel), and one thing is clear: these folks love their bikes. They handle well (for something so heavy), are comfortable, reliable, smooth, fast and have a heck of a presence—for a while, it was the biggest, baddest cruiser you could buy. “Surely, with this motorcycle,” speculated Motorcycle.com’s Andy Saunders in 1997, “Honda has reached the limit of cruiser size.” How quaint.



 

Honda killed the old girl in 2004, but that year a limited-edition custom called the Rune arrived—you may remember it. At $27,000, it was kind of a legacy bike, a made-to-order custom designed more to showcase the brand than to dominate the heavyweight cruiser market. Still, it was good-handling and luxurious-feeling, something Editor Edge and I took great pleasure in riding.
Another possible direction was the EVO6. Honda displayed this concept bike at the 2007 Tokyo Motor Show, and it made a big splash—how can an 1800cc, six-cylinder sporting standard not? It was missing the clutch lever and gearshifter—would the next Goldwing use an automatic transmission?

If anything, the new Valk is a Rune for the masses, as it uses much the same formula, albeit for a broader audience. The frame, swingarm and powerplant are all from the GL1800, but with lighter, more minimal bodywork. A low 28.8-inch seat and blacked-out one-inch cruiser bars scream “cruiser,” but an 45mm cartridge fork, twin-spar aluminum frame, radial tires (130/60-19 in front, 180/55-17 in back), single-sided Pro-Arm with linkage rear suspension and 310mm discs with four-piston Nissin calipers (that look like what Honda used on its sportbikes from the late ’90s to the mid 2000s) all scream out “sportbike.” After all, the GL1800′s Large Project Leader, Masanori Aoki, came from the sportbike side of Honda, developing bikes like the NSR250R and CBR600F3.
All that development nets a bike that weighs in at 750 pounds—154 pounds lighter than the GL1800. Heavier than the original Valk, perhaps, but it does have a lot more power—the GL1800 makes over 100 ft-lbs of torque at the wheel, and the number stays above 90 from 1500 to 5000 rpm—and a six-gallon tank, bigger than the ‘Wing’s.

Other features include removable passenger seat with grab rail, included solo cover, black-out treatment on the frame and engine, LED lighting (everywhere, including the headlight), a multi-function LCD instrument cluster and those big shrouds covering the side-mounted radiators (which duct heat away from the rider). The styling could be controversial, but it is growing on me, and I actually really like that big front wheel.
Pricing is not yet set, but Honda says it will be in the range of $17,000, undercutting the F6B. It should be available in US dealers next spring. I’m also really looking forward to riding one, but maybe not as much as the many Valkyrie fans—Christmas may have come early for them.

The next generation Yamaha YZF R1

The next generation Yamaha YZF R1 has been caught testing in Australia with a speculated output of 233PS!

The upcoming 2015 Yamaha YZF R1 has been caught testing by Australian Motorcycle News at the Eastern Creek International Speedway in Sydney. And according to speculations the next generation of the Yamaha R1 will be offered in two versions of which one will be the standard streetbike version and the other will be the top-spec version for race homologation similar to the Ducati 1199 Panigale S and BMW HP4.

The most interesting speculation is that the Yamaha will prevail with its in-line four-cylinder configuration motor and the higher-spec version is expected to churn out an eye-popping 233PS of power. Although many might dismiss the power figure as farfetched fantasy but once you factor in the fact that Yamaha is planning to make a comeback to World Superbike series, it starts to make sense.
With the new set of WSBK regulation, it is mandatory for manufacturers to homologate higher performing machines for production use and engine modifications on the race bikes will be severely restricted. This means that manufacturers will have to sell a certain amount of high-end bikes that they plan to use for racing; this would result in the consumers getting their hands on bikes that are almost similar to the machine which teams plan to race with.  So it is safe to say that the higher-spec version of the 2015 R1 will be loaded with top-shelf parts for suspension, brakes, exhaust system and wheels.

But this doesn’t mean that the standard version will be a slouch in any means as it is expected to have a power output of around 200PS and will be equipped with a traction control system and electrically adjustable suspension system. The streetbike version of the 2015 Yamaha R1 is also expected to debut with a dual-clutch transmission system – a first for any production Yamaha motorcycle. In terms of styling, from the grainy image one can make out that the next generation of the Yamaha R1 will be heavily inspired from its smaller sibling - the Yamaha R6 but more details on it once clear shots of the bike appear.